Eliminating hazards in LCD screens

Myads

Eliminating hazards in LCD screens

One thing is quite confusing an LCD screen scratched. It seems that the eyes go straight to where the risk is ... and no matter how small, always looks like a mountain . The method we discovered and we are publishing grew out of experiments with a batch of scrap fabrics, among which some were scratched. We tried numerous ways to address the risks and found that many get even worse.   But that gave the best result is that we teach here. For this delicate operation you will need two pieces of cloth, clean and soft, a little alcohol and a pen to write on CDs and DVDs with black ink, those type Permanent Maker. It's so simple that it seems unbelievable ... Step 1: Clean up any residue of dust that is on the screen (you may use a piece of cotton) Step 2: Using the pen, paint the groove of the risk, completely covering it with ink. You can paint the side of risk too ... 3 With the cloth moistened with alcohol, remove excess paint, do not appear to brands. This must be done quickly, soon after spraying, but the ink does not come out ... Ready: where's the risk? Well, the photo appear two small "remnants" of the risk to show where he appeared before. The explanation for this is that the LCD screen is dark and polycarbonate screen protector is clear and opaque spot scratched . So it appears brighter when the screen is off and causes a leaf blight when lit. The whitish ink paints the risk and he no longer appears with the screen off and when not lit, because the diluted paint does not block the passage of light. Note: 1) Do it for your own "risk"  2) The entire operation should be done carefully to avoid damaging the liquid crystal.